Nilla Trinadh Venkata Kumar
Email : trinadh.venkat62 AT gmail.com
Job Role : QC Welding Inspector (AWS-CWI)
Professionl Summary :
Result-oriented with more than 6 years experience in Quality Assurance/Quality Control Inspection on Power, Oil & Gas and Steel plant construction projects. Primary inspection responsibility are monitoring, supervising and apprising the Contractor’s/Sub-Contractor’s Fabrication, Construction and Repair performances in the area of Quality Control including evaluation of materials and procedure in accordance to applicable project specification. Such inspection responsibilities includes monitoring and checking the Quality works in the areas of Mechanical, Piping, Welding, Pipelines, Tanks, Painting, Insulation and NDT.
Repair inspection reports and issue non conformance reports as required. Other responsibilities are support to commissioning of plant equipment utility preventing maintenance, condition monitoring and hand over documents; assist in the implantation of safety and environmental protection programs; and provides data required on project progress.
Skills :
** Good communication skills Knowledge in construction safety
** Fast learner Strong interpersonal skills
** Computer skills Engineering Drawings/Standards
** Project management skills General math skills
** Strong initiative Familiarity with weld inspection process
** Strong team player Good judgment
Experience :-
1. Organization : M/S Oriental EPC Pvt. Ltd.
Designation : ENGINEER (QA/QC)
Project : 3.0 inter plant pipeline and gas mixing & boosting station, Pkg-20, Nagarnar (C.G)
Consultant : MECON LIMITED
Owner : NMDC
Duration : December 2018 to TILL NOW
2. Organization : M/S POWER MECH PROJECT LTD,
Designation : ENGINEER (QA/QC)
Project : REFINERY PROJECT, JAMNAGAR, GUJURAT
Client : RELIENCE INDUSTRIES LTD.
Duration : May 2013 to August 2017
3.Organization : M/S POWER MECH PROJECT LTD,
Designation : ENGINEER (QA/QC)
Project : Thermal power statoon Uoit-3 (260MW).
Consultant : BHEL
Owner : Gujarat state electricity corporation limited (G.S.E.C.L)
Duration : September 2017 to December 2017
4.Organization : M/S POWER MECH PROJECT LTD,
Designation : ENGINEER (QA/QC)
Project : NNTPP (THERMAL PLANT 2*500MW)
Consultant : BHEL
Owner : New Neyveli Thermal Power Plant site
Duration : January 2018 to November 2018
Job Responsibilities : -
** Welder Qualification Test Conducted as per WQTR.
** Material receiving inspection, storage & preservation.
** Inspecting Pipe Fit-up, alignment, Before welding, while welding, After welding
** Offering N.D.T & inspecting the radiography film.
** Arrange the P.W.H.T & Hardness test as per WPS.
** Visual inspection on welds and parent material.
** Inspecting Pipe support as per ISO metric drawing, verification of slope, valve installation, pipe flange, Orifice flange
** Maintaining Line History Sheet, Preparing Site Inspection Reports of Fit-up, Weld Visual, DPT, MPT and Hardness.
** Filling & maintaining all kinds of Quality related documents as per ISO Standards.
** Inspecting and conducting Hydro test.
** Pre-visual Inspection of all equipments whichever is opened like pressure vessels, Boilers, Reactors, Reformers, Heat Exchangers, Surge drums, Columns and Towers etc.
** Inspection after Cleaning / Chemical Cleaning, & list out the repair activities in accordance with procedures and standards.
** Inspection after repair in Heat Exchangers like Tube, Tube sheet change, Plugging, Seal welding of tubes, Hydro test shell & Tube sides etc.
** Inspection of Drums & Vessels for its Mechanical Integrity, review of all NDT Related activities & final Box – Up.
** Visual Inspection of Crude Column, Identifying damaged trays, Chimney trays, Removal & install of new trays, Hydro test of Chimney trays & final Inspection.
Educational Details :-
B.TECH INTERMEDIATE RAMACHANDRA COLLEGE OF ENGINEERING, VATLURU ANDRAPRADESH UNIVERSITY KAKINADA 2013 64%
SRI KAATYAYANI JUNIOUR COLLEGE ELURU ANDRAPRADESH JAWAHARLAL NEHRU TECHNOLOGICAL STATE BOARD OF INTERMEDIATE 2009 82.4%
Achievements :-
** Successfully completed Hydro test of Piping - J3 C2, CPP Project.
(Refinery Division)
** Checking all fit-up joints as per ISO drawing, visual inspection, NDT methods as per WPS, support checking with Client.
** Checking the Mechanical clearance and Quality clearance certificates before and after hydro test.
** Performed Hydro test with 1.5times the design pressure.
** Post hydro test visualization of welding joints, flanges and valves inspection should be done.
** Hand over the all completed documents to Client Company.
Technical Qualification :-
1) Certified Welding Inspector (CWI-AWS)
2) ASNT-LEVEL-II Certification on
1. Ultrasonic Testing
2. Radiographic Testing
3. Magnetic Particle Testing
4. Dye/Liquid Penetration Testing
Computer skills : -
MS OFFICE, TALLY, ERP 9
Declaration :-
I hereby declare that the above particulars furnished by me are true to the best of my knowledge and belief.
Date :
Place :