RESUME:
S.RAJKUMAR
Email id :rajkumar2542013 AT gmail.com
CAREER OBJECTIVE :
To obtain a challenging position in a high quality engineering environment where my resourceful experience and academic skills will add value to organizational operations.
WORK EXPERIENCE : -
A Dynamic Professional with experience in Quality Control & Quality Assurance .
CURRENT EMPLOYMENT : -
ZOMAR TECHNOLOGIES PVT LIMITED.
SCOPE : Manufacturer of sheet metal Fabricated Parts and Assemblies and injection Molded Parts through the Process of stamping, Welding &Injection Moulding.
Certification : IATF 16949-2016 Certified Organization.
Products : Seat Links, Light Assy, Clutches, Gear Assy, SteeringAssy,etc.
DESIGNATION :
ENGINEER : QUALITY ASSURANCE(DEC 2018 To Till Date)
Job Responsibilities :
** Monthly monitoring the quality rating, defect analysis, ppm and review the supplier problem
** Performing the Supplier selection and Evaluation
** Conducting Supplier Audits and follow up of Audit Closure
** Doing Supplier PPAP Approval Process
** Supplier development & follow-up
** Controlling the Incoming Inspection & In process Inspection
** Preparing APQP Documents
** Analyze the root cause of the In-house issues and provide immediate corrective action for the problem.
** Preparing PPAP (FMEA, CONTROL PLAN, ISAR, PSW)
** Monitoring and Controlling the PPM in In-house & Customer
** Conducting Internal Audits
** Reviewing the Internal Documents
** Validation of product/Process
** Instrument calibration Control
** Raw Material and Sub Assembly Parts Material testing and validation control
** 4M Change Control
** Warranty control
** Facing development & PPAP audit
** Facing SQ Mark audit & ISO/IATF Audit
** Follow up of audit closure with customer
** Conducting Management Review Meeting
PREVIOUSEMPLOYMENT :-
ESTEEM POLYMER PRODUCTS PVT LIMITED.
(SCOPE : Manufacturing of plastic components for Automotive, Electrical & Electronics Industries.
Certification : ISO 9001-2015 Certified Organization.
Products : Sun Visors, Bearings, Fuel Tank Assy, Door Latches, Surge Tank Products, etc.
DESIGNATION:
ENGINEER : QUALITY ASSURANCE (DEC 2015 To NOV 2018)
Job Responsibilities :
** Preparing Advanced Product Quality Planning Documents
** Preparing Control Plan, FMEA, Process Flow Diagram
** Trial taken during development with various material.
** Preparing PPAP Documents
** Doing Supplier selection and Evaluation Activities
** Conducting Supplier Audit
** Followup of Audit closure With Supplier and Customer
** Follow up of Raw Material Validation
** Conducting Internal Audit
** Conducting Product/Process Audit
** PPM Monitoring and Control
** Perform of initial approval of parts
** Facing the customer Audits& ISO Audits
** Ensure whether the final product meets the Quality requirements for the customers.
** Provide training for the inspectors and the operators whenever necessary and document it.
** Handling the all instruments & inspect the parts and report to customer
** Preparing 8D/Counter Measurement
** Doing MSA study and Cp/CpK study
** Implementation of POKEYOKE, KAIZEN
PREVIOUS EMPLOYMENT : -
SRI GM PLASTICS
SCOPE :Manufacturerof Plastic components.
Certification : ISO 9001-2008 Certified Organization.
Products :MirrorAssy, Wheel guards, etc.
Designation:
ENGINEER : QUALITY ASSURANCE (From MAY 2015 to DEC 2015).
Job Responsibilities :
** Facing the in-process & incoming inspection
** Raise Non-Conformance report and submit immediate to manager
** Perform of initial approval of parts
** Ensure whether the final product meets the Quality requirements for the customers.
** Provide training for the inspectors and the operators whenever necessary and document it.
** Handling the all instruments & inspect the parts and report to customer
** Engineering Changes and Layout Inspection
AWARDS:
Esteem Polymer : Best overall performance award–2018 for EATON
TRAINING :
** Organization Process Improvement - (17.09.2018-20.09.2018) Training Provided by Automotive Components Manufacturer Association of India Organized by Esteem Polymer Products Pvt Ltd.
** ISO9001-2015 & IATF 16949-2016 Internal Audit-(14.05.2018-19.05.2018) Training Provided by Automotive Components Manufacturer Association of India Organized by Esteem Polymer Products Pvt Ltd.
** IATF & QMS–(04.09.2017-06.09.2017)Training Provided by PHA India pvt ltd(Through PQMS) Organized by Esteem Polymer Products (p) Ltd.
** Advanced Product Quality Planning & Production Parts Approval Process–(06.02.2017-11.02.2017)Training Provided by Eaton Pvt Ltd(Through Webex) Organized by Esteem Polymer Products Pvt ltd.
** Seven Quality Improvement Tools & Problem Solving Tools-(18.04.2016-23.04.2016)Training Provided by Shrishti Consultant Organized by Esteem Polymer products pvt ltd.
** Six Sigma Green Belt Training Program -(16.03.2015-21.03.2015) Training Provided by Southern Polymers.
CORE SKILLS :
** (CQI 23 Assessment) Injection MouldingProcess Control
** (CQI 15 Assessment) Welding Process Control
** (CQI 11 Assessment) Plating Process Control
** (CQI 12 Assessment) CoatingProcess Control
** (CQI27Assessment) Casting Process Control
** Stamping(Press Shop) Operations control.
TECHNICAL SKILLS :
** Advanced Product Quality Planning.
(APQP)
** Production Part Approval Process.(PPAP)
** Statistical Process Control.(SPC)
** Measurement System Analysis.(MSA)
** Seven QC Tools, QMS Documentation,
** ISO 9001-2015 Standards and IATF 16949 :2016 Standards.
COMPUTER SKILLS :
** Completed a course in IT Foundation
** Completed a course In Hardware & Networking Sponsored by govt of india (Ministry of Rural Development)
** MS office 2007, AutoCad, Solid Works
SKILLS :
** Good Communication Skill
** Problem-Solving Skill
** Documentation Skill
** Analytical skill
** Process Improvement Skill
** Safety Management Skill
** Innovative Skill
FIELD OF INTEREST :
** Quality Management System
** Research and Development
EDUCATIONAL QUALIFICATIONS :
B.E–Mechanical Engineering (2011-2015) : SBC Engineering College,Arni.CGPA:7.41
H.S.C(2011)– Subramaniya Sastriyar Higher Secondary School,Arni.Percentage :73%
S.S.L.C(2009)– Arignar Anna Government High School,Dhamaraipakkam.Percentage :92.4%
ACADEMIC PROJECTS :
MINOR : Multifan System Using Single Motor.
MAJOR : Fabrication of Tool & Cutter Grinder Machine
PERSONAL INFORMATION :
Name : S.Rajkumar
Father Name : N.Sekar
D.O.B : 25.04.1994
Languages Known : Tamil & English
Hobbies : Working with Excel and Power Point
DECLARATION:
I hereby declare that all the information given above is correct to the best of my knowledge and belief.
DATE :
PLACE :