OBJECTIVE :
Seeking a responsible and rewarding position in dynamic environment to further the growth of the organization where I can build my experience and learn new things everyday utilizing my technical background.
EXPERIENCE SUMMARY :
Piping layout engineer with around 3 years of experience. Preparation & checking of G.A drawings, piping layout. Preparation of Isometrics. Generating Bill of material. Pipe routing. Wall thickness calculation, 3D modeling of mechanical equipments like pumps, heat exchangers, process columns etc in PDMS. Extraction of piping Orthographic&Isometric drawings using Draft& IsoDraft. Conversant with various international standards (ASME b 31.3).Pump suction model. Selection of supports. Flange Leakage Analysis. Pump discharge model. Pipe rack load calculations. Expansion loop calculations.
SKILLS PROFILE :
Packages : PDMS (11.6, 12.0), Basics in Ceaser-II, AutoCAD.
ACADEMIC QUALIFICATION :
Diploma in Process Piping Design & Engineering per ASME B31.3. Institute of Piping Engineering and Building Services, Hyderabad.
B-Tech in mechanical : 2009 Passed Jawaharlal Nehru Technological University, Kakinada, Andhra Pradesh.
Diploma in Mechanical Engineering : 2005 Passed. State Board of Technical Education and Training, Hyderabad.
PROFESSIONAL EXPERIENCE :
Petrocon Engineers & Consultants, Mangalore : April 2010 – May2012
Piping Designer (PDMS)
Silicon Engineers & Consultants, Hyderabad : September 2009- March2010
Piping Designer (PDMS)
EXPERIENCE SUMMARY :
1. Project : Ettrick Field Development Project
Client : Vetco Aibel.
Role :
** Worked for the Flare Area of the project.
** Utility Piping, Water Injection System Piping.
** Designing of Utility stations and utility piping for the Process area in PDMS.
** Modeling of Equipment for such as Pumps, Drum, Tank & Air coolers and Knock out Drums in PDMS.
** Designing of Temporary Platforms such Pump shed, Nitrogen Cylinder shed and Service platforms.
** Providing Tie in Point Co-ordinates to Pipeline Dept.
** Preparation of Nozzle Orientation Drawings.
** Extraction of weekly status report.
2) Project : Qarn Alam Steam Plant
Client : Petroleum Development, Oman.
Role :
** Preparation of piping layout for utility service, process lines, open and closed drain systems.
** Modeling of LP Flare & AP Flare system for the plant (Main Equipment Involved are KOD (Knock out drums).
** Equipment modeling in PDMS as per equipment detail drawings and layouts reactor, compressor areas, heat exchanger.
** Modeling of piping routing in PDMS as per the P&ID i.e.
firewater, cooling water, flare, open drain and closed drain and hydrocarbon fuel gas, steam, process lines.
** Isometric generation in isometric drawing manager and extract general arrangements in drawing manager from PDMS and convert in auto cad.
3). Project : BG Panna Field Development Project
Client : ONGC India
Role :
** Designing of Utility Piping & Drain system.
** Pipe routing as per P&ID in the PDMS.
** Extraction of isometric drawings from PDMS.
** Preparation of piping GAD.
** Modeling of equipments in PDMS as per vendor drawings.
** Modeling of temporary platforms required for operations and maintenance for Pump shed & Nitrogen Cylinder Shed in PDMS.
** Performing data consistency check and clash check.
** Providing structural information drawings to the structural Department.
** Providing tie-in point co-ordinates to the pipeline department.
** Extraction of GA’s in PDMS Draft.
** Preparation of detailed drawings and BOM for the pipe supports.
4). Project : HPCL – Oil Tanking Project, Bathinda, Punjab
Client : HPCL
Role :
** Worked for Utility Area, Flare Area Piping.
** Equipment modeling in PDMS as per equipment detail drawings and layouts of extrusion poly ethylene and extrusion poly propylene, powder bin silo, reactor, compressor areas.
** Modeling of piping routing in PDMS as per the P&ID i.e. firewater, cooling water, flare, open drain and closed drain and hydrocarbon fuel gas, steam, process lines.
** Isometric generation in isometric drawing manager and extract general arrangements in drawing manager from PDMS and convert in auto cad.
5). Project : NGPL.
Client : Abu Dhabi Gas Company.
Role :
** Modeling of piping for Separator Area, Water Injection Area and Flare Area in PDMS.
** Modeling of equipment as per the vendor data, vendor package drawing & SKID drawings.
** Fixing the tie-in points for the area and skid piping.
** Preparation of nozzle orientation drawings for vertical columns.
** Preparation of piping layout for utility service, process lines, open and closed drain systems.
** Modeling of supports as per support span calculation for non-critical lines and isometrics for critical lines in MDS.
** Checking of equipment layout as per the vendor information available.
** Checking of isometrics as per P&ID.
** Updating of site queries and generation of as-build drawings.
PERSONAL PROFILE :
Marital Status : Unmarried
Nationality : Indian
Languages : Telugu, Hindi and English.
DECLARATION :
I hereby declare that all the information furnished above is true to the best of my knowledge.
DATE :
PLACE :