CURRICULAM VITAE :
CHINNI KRISHNA DUPPALAPUDI
Email : chinnikrishna305 AT gmail.com
OBJECTIVE :
Seeking a challenging position in the field of Quality Assurance / Quality Control, where providing the opportunity to make a strong contribution to organizational goal through continued development of professional skills.
SUMMARY :
10+Years Of Experience In The “Quality Assurance / Quality Control” Department Worked Under “M/S Psl Limited”& “M/S Hyundai Heavy Industries Co.,Ltd.” & “M/S Marine Infra” & Saudi Armco Total Refinery And Petrochemical Company (Satrop) With KBR As A Quality And Reliability Engineer For Welding and as a Asst. Manager for the quality and Reliability dept in KBR for SATORP maintenance project in Saudi Arabia .
PROFESSIONAL QUALIFICATION :
Bachelor of Technology in Mechanical Engineering from the University of JNTU, KAKINADA, ANDHRA PRADES, INDIA. Passed out in the year 2009 (Full Time in VITAM college of engg.).
PROFESSIONAL CERTIFICATION QUALIFCATION :
CSWIP 3.1 Certified Welding inspector From TWI.
CSWIP CERT NO 64763
Date of expiry 6 October 2021.
TECHNICAL QUALIFICATION :
ASNT Level II in RT, UT, MPI, LPT. Certification course did in one of the REPUTED institutes in 2010 March.
RADIOGRAPHIC TESTING FILM INTERPRETATION (RTFI) Certification course from NISSI QUALITY SERVICES (NQS) In 2011 April.
EXPERIENCE :
M/s PSL LIMITED VIZAG :
Site : Gurrampalem, Pendurthi, Visakhapatnam.
Position : “Asst.QUALITY ENGINEER” From May 2009 to April 2010
M/s HYUNDIA HEAVY INDUSTRIES CO., LTD. :
DERRICK&PIPELAY BARGE HYUNDAI-2500
Worked as a Asst .QUALITY ENGINEER In Quality Assurance / Quality Control department.
PROJECT : Dragon &tortoise Gas Utilization project For Vietsovpetro/PVSEG in Dragon field at Vietnam.
Designation : “Asst .QC ENGINEER”
PROJECT : Bongkot Field development Project-Phase 4A for PTTEP in Bongkot field at Thailand.
Designation : “Asst .QC ENGINEER”
PROJECT : Crude handling facilities project for Indian oil corporation limited (IOCL), Paradip field at Orissa, INDIA.
Designation : “Asst .QC ENGINEER”
FROM : APRIL 2010 TO APRIL 2011.
Worked as a quality assistant engineer for the Hyundai heavy industries for the derrick pipelay barge, Roles and responsibilities in Hyundai-2500
** Verify materials against mill certificates.
** Review consumable handling/storage and issue.
** Monitoring of Welder Qualification Test, WPQT for Manual Welding and Automatic
** Welding to follow the specified procedures.
** Witness and Perform Visual and Dimensional Inspection.
** Verify documentation of welding procedure qualifications.
** Verify that welders, welding operators have been properly qualified in accordance with the applicable codes, standards or other documentation and that their
** Qualifications permit them to use the welding procedures specified for their work.
** Witness performance and testing of welder and/or welding operator qualification weld tests. May also be required to verify these activities when performed by other agencies.
** Verify documentation of the weld qualification test results.Monitor correct fit-up, joint preparation and surface finish meets the applicable code specification or standard.
** Monitor proper pre-heat and inter pass temperature is maintained as required per the applicable code, standard or other documents.
** Monitor that joint preparation and fit-up meet the requirements of the welding procedure and drawing.
** Monitor that the specified consumables are used and that the consumables are maintained in the proper manner/condition, per specification requirements or as recommended by the manufacturer.
M/S MARINE INFRA :
Client : M/s.
International Paper
Project : M/s I Paper shut down project.
Position : “WELDING INSPECTOR”
FROM : APRIL 2011 TO DECEMBER 2012.
M/S KBR-AYTB-JV :
Client : M/s SATORP
Project : M/s SATORP, JUBAIL,SAUDI ARABIA.
Position : “QUALITY & RELIABILITY ENGINEER (WELDING) ”
FROM : JAN2013 TO TILL DATE .
Worked as QA Engineer for the Project :
** Working as a quality assistant assurance manager for the department of quality and reliability
** Maintaining project key documents and ensure quality for electrical mechanical welding and instrumentation during the period of shutdowns
** Key support for the all MOCC during the maintenance and shutdown period
** Playing major roles as quality control and quality assurance engineer for the major shut downs and turnarounds
** Preparing quality plan for the whole maintenance project and approved by the client
** Good interaction with client during the project
** Playing a major role in internal and external audits
** Responsible for the Inspection of Fabrication & Erection of Piping (CS, SS and alloy steels ) & Pipe supports and Structures.
** To ensure that Job is carried out as per approved ITP and Method statement.
** Conducted Welder Qualification tests and related Destructive and nondestructive tests, Interpretations of R.T films.
** Monitoring the PWHT activates as per the procedures.
** Inspection as per the approved WPS, PQR and QCP.
** To monitor electrode controls.
** To monitor individual welder Performances.
** Visual and Fit up inspections.
** NDT Co-ordination with sub contractor.
** Dimensional Check and Spool Clearance.
** As per ASME B31.1, B31.3 .API 1104 and ASME SEC-II,SEC-V,SEC-VIII,SECIX.
SKILLS AND STRENGTHS : -
** Good Communication Skill
** Have good problem solving with analytic thinking.
** Efficient Management and Leadership ability
** Expertise with latest tools and techniques
** Open minded to work in complex environment and projects
** Excellent Time Management to finish the work scheduled on Time
** Well versed with the usage of computer and Microsoft office tools, & Internet and email.
STRENGTHS :
** Willing to learn and improve constantly.
** Self – disciplined, sincere and posses a positive attitude towards life.
** Willing to accept responsibility.
** Excellent personal relation and communication skills.
** Enthusiasm is learning new things combined with a belief in hard work make me suitable to meet the tough challenges of job.
COMPUTER SKILLS :
Operating Systems : MS- DOS, Windows- 98/XP, MS Office.
LANGUAGES : “C”, JAVA.
PACKGES : AUTO CAD, CATIA, UNI GRAPHICS, ANSYS.
PERSONAL DETAILS :
Father’s Name : D.TRINADHACHARI
Date of Birth : 27/05/1987.
Marital Status : Married
Religion / Nationality : Hindu / Indian
PLACE : Visakhapatnam, India
DATE : 11/06/2019