OBJECTIVE :
Seeking a dynamic career in an esteemed organization that provides opportunities for professional development and exposure to the new technologies. To utilize and share my knowledge to the best in taking up challenging assignments to improve this world.
TOTAL EXPERIENCE : 10 YEARS
Last Experience : Honda Seil Car India Ltd
Feb 2007–March 2010
Company Profile :
Honda Siel Cars India Limited (HSCI) is a joint venture between the Honda Motor Company of Japan and Siel Limited, a Siddharth Shriram Group company. It currently is the 8th largest car maker in India after Maruti Suzuki, Hyundai, Tata, Mahindra, Chevrolet, Ford and Toyota. It was begun in December 1995. The venture was begun with the aim of delivering Honda's passenger car models and technologies to the Indian market. The total investment made by the company in India till date is over Rs. 800 crores.[1]
Mr. Takashi Nagai is the current President and CEO of HSCI. He took over this post in August 2005.
Job Profile : Worked as an Executive Engineer in PQ Deptt.
My job profile includes :
Customer Complaint :
Handling of customer complaint & responsible for the implementation of corrective /Preventive action by using 7QC Tool against the customer complaints .
Analyzing for the high online rejection and customer end PPM by using the Statistical
Technique:
Coordination with Supplier for corrective Action Plan implementation.
Visit to supplier end for verification of corrective action .
Verification of the market failed part jointly with supplier and market Quality.
IQA (Internal Quality Audit) :
Carrying out the Process, Products & System Audits, and responsible for the IQA (Internal Quality Audits system). System. And verification of action taken against Internal concern at supplier end.
Verification of the NC for there effectiveness of action taken.
Monitoring of delays in NON Conformity clouser.
Verification of Internal concern for there CAPA.
Quality system
To stop the production in case of Non conformity raised.
Responsible for the implementation of all Quality related System in the production as per ISO .
Responsible for the kaizen activates in the organization
Responsible for the verification of PPAP Lot implementation & its approval
Making of Quality related document like (Work instruction, Procedure, One point standard.
Being a kaizen team leader initiating & monitoring all kaizen activities for continuous improvement.
Making of kaizen monthly report.
Verifying the NG KD part and Making of KD report through verification of the technical advisior.follow up with MS for new lot from source country.
Inspection of KD part as per the schedule .
Layout inspection of the supplier parts.
QAV audit at supplier end.
Management Review Meeting
Responsible for making and verifying the action taken against the points raised in Monthly Management Report Responsible for making and verifying the action taken against the points raised in Monthly Management Report
Quality Control Activities : ( Incoming Inspection, In –Process Inspection , Final Inspection )
Present at :
May 2003 – Feb 2007 Goldwyn Ltd.
Company Profile :
Goldwyn Ltd a TS : 16949 Certified company,100% EOU is engaged in manufacturing Regulators. Rectifiers, Pressure Device, Switches, Steering Gears, Indicators light and other Plastic Moulded components for overseas Customer in Germany, USA, IRAN & Switzerland.
Job Profile : Worked as an Engineer in QA Deptt. My job profile includes:
Customer Complaint :
Handling of customer complaint & responsible for the implementation of corrective /Preventive action by using 7QC Tool against the customer complaints .
Analyzing for the high online rejection and customer end PPM by using the Statistical Technique.
Coordination with customer for Action Plan implementation.
IQA (Internal Quality Audit) :
Carrying out the Process, Products & System Audits, and responsible for the IQA (Internal Quality Audits system). System. And verification of action taken against Internal concern & customer concern
Verification of the NC for there effectiveness of action taken.
Monitoring of delays in NON Conformity clouser.
Verification of Internal concern for there CAPA.
Quality system :
To stop the production in case of Non conformity raised.
Responsible for the implementation of all Quality related System in the production as per TS : 16949 SYSTEMS.
Responsible for the kaizen activates in the organization
Responsible for the PPAP Lot implementation & its approval
Making of Quality related document like (Work instruction, Procedure, One Point Standard, control plan, Pfmea, PFD making of APQP.
Responsible for the Tool validation for new Products of molded parts.
Being a kaizen team leader initiating & monitoring all kaizen activities for continuous improvement.
Responsible for making and verifying the action taken against the points raised in Monthly Management Report Responsible for making and verifying the action taken against the points raised in Monthly Management Report
Quality Control Activities : ( Incoming Inspection, In –Process Inspection , Final Inspection )
Incoming inspection of BOP(Brought out parts) & CSP (Customer supplied parts components (metal, rubber, molded) as per the sampling plan
Preparation of inspection Standards for Incoming, in process & Final inspection.
Making the subassemblies & final assembly standards for checking the defects.
Making of incoming inspection plan.
Calibration of the measuring instrument.
MSA Studies .
Training :
Conducting training for exposing employee to the quality system
Provide job specific training to the new operator.
Making of training manual.
Projects :
Experience on setup of new product production line with the implementation of APQP.(Microswitch).
Experienced in handling the production of new project of wiring harness .
Coordination with customer & management for the new implementation of new product / Modification of product.
Oct ’ 99 April’2003 Motherson Sumi Systems Ltd.
:
Company Profile :
Motherson Sumi Systems Ltd. An ISO-9001, QS-9000, ISO/TS/16949 & ISO-14001 Certified with the collaboration of “ Sumitomo wiring systems (SWSJAPAN). MSSL is the leading wiring harness manufacturer & Supplier of India’s highly positioned automobile manufacturer Like : Maruti Udyog Ltd., TELCO, M&M, BAJAJ, YAMAHA, HEROHONDA, TOYOTA, HMSC, MERCEDES-BENZ, PIAGGIO, FORD etc.
Job Profile : Worked as an Engineer in QA Deptt. My job profile includes:
Handling of customer concern and ensure the corrective and prevention action against the customer concern.
Carrying out process Audits on the shop floor to ensure the follow up the system. And verification of action taken against Internal concern & customer concern.
To provide on job training (related to process) to the associates.
Conduct extensive training session for Associates to induct Quality Awareness.
Making of weekly & monthly report to the management.
Responsible for 5s & kaizen Activities in the plant.
Responsible for in process inspection, final inspection.
Handling of Customer concern, online rejection and Analysing the root cause by using 7 QC Tool, SPC Technique.
Responsible for the implementation of all quality related process in the production as per TS : 16949 SYSTEM.
Coordination of customer concern meeting & MIN meetings .for the new implementation of new product and modification of product.
Responsible for PPAP LOT implementation and its inspection.
Making of quality related document like (Work instruction, Standard operating procedure, Pfmea, PFD, One point standard, control plan, & making of PPAP, APQP, as per TS requirement.
Coordination of Quality Circle Activities.
Being a kaizen team leader initiating & monitoring all kaizen activities for continuous improvement.
PREVIOUS ASSIGNMENT :
Worked as a Trainee in Prakash & Company (ISO-9001 & ISO-14001 Certified) since Jan’1998 to Feb’1999 on contract at Narora Atomic Power Station, Distt – Bulandshahr.
JOB PROFILE :
Component testing through D.M.M, LCR Meter
Soldering of electronic component.
Inspection and testing of electronics
EDUCATIONAL QUALIFICATION :
Diploma in Electronics engineering with 78 % from U.P.B.T.E in 1997.
B.Tech from “ Jamia University”.
SKILL ACQUIRED :
SPC.
KAIZEN Training from MSSL.
PPAP.
APQP.
QUALITY CIRCLE.
5S.
QMS (ISO-9001-2004, QS—9000, ISO/TS/16949)
LANGUAGES :
English & Hindi.
DATE :
PLACE :