Mechanical ENGINEER
Name : Adam
Nationality : Indian
EMAIL ID : adammissly AT gmail.com
QUALIFICATION :
BACHELOR DEGREE IN Mechanical ENGINEERING – (B tech)
Additional Technical Qualifications :
ASNT Level II in Radiography Testing (RT)
ASNT Level II in Magnetic Particle Testing (MPT)
ASNT Level II in Penetrant Testing (PT)
ASNT Level II in ultrasonic Testing (UT)
PERSONAL DATA :
NATIONALITY : INDIAN.
RELIGION : HINDU.
Marital status : Single
Linguistics : (to speak, write/read)
1. Malayalam
2. English
3. Hindi
Strength : Ambitious, Hard working, Positive attitude.
PASSPORT NO : G 3769737
DATE OF ISSUE : 23/08/2007
DATE OF EXPIRY : 22/08/2017
Educational Qualification :
B.e in Mechanical engineering with 69% aggregate from GOVT. College of Engineering,Kannur .
12th (20002002) under Kerala State Board of Secondary Education with 80.3% from G.V.H.S. School Madapally.
10th (2000) under Board of Public Examination with 83% aggregate from St.George High school Vilangd.
Experience :
Overall Experience of 3 Years in the Petrochemical Piping, Quality Assurance, Quality control activities in Construction Projects.
Projects :
(A) JAMNAGAR PETROCHEMICAL COMPLEX :
Company :Neo Strcuto construction PVT.Ltd
Client : RELIANCE
Position : PIPING ENGINEER
Period : 2007 JUNE TO 2008 JULY
THE JOB INVOLVED :
Monitored piping materials take off, prefabrication and piping erection activities.
Planning & scheduling of construction activities according to work front requirement
Allocation of Material, Man power and Equipment for daily work activities
Preparation and assessment of daily progress report and coordinating progress review meetings.
(B) SAUDI KAYAN PHENOLICS PROJECT, Jubail, K S A :
Company : NasserSAlhajri corporation Ltd.
Client : SABIC
Position : QA/QC ENGINEER(PIPING, WELDING, INSULATION & STEAM TRACING)
Period : 2008 OCTOBER to 2009 OCTOBER
THE JOB INVOLVED :
Preparation of Inspection and Test Plans and formats.
Material Inspection and Test Certificates Verification.
Inspection of Piping System wise and conform it is according to P&ID, Isometric Drawings.
Monitoring of Welding Consumables, Preheating, Welding and Weld Visual Inspection, PWHT / NDT / Hardness Test, PMI Test as per the WPS, 1TP.
Capable of investigating causes for Failure in Welding, Painting and Hydro testing and Propose Rectifications in accordance with the applicable standards.
Inspection and Clearance of Fit up, Weld Visual of all piping under ground, above Ground Piping and In Process Inspection.
Conducting and Interpretation of Radiography Examination, Penetrant Examination and Ultrasonic testing.
Regular Monitoring and Reviewing of Calibrated Measuring and Test Instruments and Maintaining Records, Including Recalibration.
Attending weekly Meetings with Client, CoOrdination with Client for Technical Discrepancies.
Carry out Inspection works after taking Relevant Safety Permits from the Client and follow the Company HSE Policies.
Submission of Weekly quality Report With respect of all activities. Checking of Test Pack and Final Documental
Managing the Insulation activities done by CAPE RB HILTON LTD.
Check the clearance between insulation and adjacent surface.
Check the thickness of insulation material installed.
Check correct banding and springs are used and applied at proper intervals.
Check proper use of mastic materials.
Visual checking of general appearance of installed insulation.
The steam tracing system shall be inspected visually only before installation of insulation.
Cracks and flattering of steam tracing tube is checked while bending.
Checking the correct installation of steam tracing tube.
( C ) GREEN DIESEL PROJECT ,RUWAIS,UAE. :
Company :Target Engineering & Construction Company(W.L.L)
CLIENT :TAKREER .
Position : PIPING ENGINEER
Period : 2010 MAY to Till DATE
THE JOB INVOLVED :
Preparation of Hydro Test package.
Preparation of TieIn package.
Coordination of PrePunch Activities.
Coordination of Hydro Test activities at site.
Designing of manifolds.
Calculation of water volume required for hydro test.
Coordination of Precommisioning activities.
Attending Meeting with Client.
Preparation of AsBuilt drawing.
I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Date :
Place :