EDUCATIONAL QUALIFICATIONS :
Bachelor of Engineering (B.E) in Mechanical Engineering, with I class.( 2004, Bharathiar University, INDIA)
Diploma in Mechanical Engineering with I class (1998, Technical Board of Madras INDIA)
CERTIFICATIONS :
CSWIP 3.1 WELDING INSPECTOR .Certificate No : 34674. TWI UK.
ASNT NDT-LEVEL II RT
ASNT NDT-LEVEL II UT
ASNT NDT-LEVEL II PT
ASNT NDT-LEVEL II MT
EXPERTISE IN FOLLOWING AREAS :
Reviewing QCP, ITP, Method statement & other work procedures.
Inspecting the materials regarding Traceability, Physical condition and
drawing requirement.
Reviewing WPS /PQR / Welder Qualification records.
Inspecting Joint Configuration of Fit up prior to weld as per WPS.
Checking alignment / Orientation of pipes as per Iso Drawing.
Surveillance of welding parameters / Consumables for compliance with WPS.
Monitoring calibration status of welding machines, Inspection tools, Quivers.
Conducting the welders performance test
Visual inspection of final weld profile.
Witnessing the NDT methods. Monitoring the heat treatment cycle and charts.
Witnessing the hydro / Pneumatic test
Coordination with the client during quality Walkthrough.
Rising of NCR / CAR / TQ.
Generating quality control reports.
Preparation of test pack and final documentation
WORK EXPERIENCE (8 YEARS) :
CONSOLIDATED CONTRACTORS INTERNATIONAL COMPANY .QATAR.
(From 8 January 2007 to till date)
A Subcontractor of CHIYODA-TECHNIP JOINT VENTURE (CTJV) for Qatar Gas II (QGX II) LNG project which is the world’s biggest Project of producing 16 Million Tons of LNG per annum.
Position : Welding Inspector
Roles & Responsibilities :
Reviewing QCP, ITP, Method statement & other work procedures.
Inspecting the materials regarding Traceability, Physical condition and
Drawing requirement.
Reviewing WPS /PQR / Welder Qualification records.
Inspecting Joint Configuration of Fit up prior to weld as per WPS.
Checking alignment / Orientation of pipes as per Iso Drawing.
Surveillance of welding parameters / Consumables for compliance with WPS.
Monitoring calibration status of welding machines, Inspection tools, Quivers,
Witnessing the welder qualifications
Visual inspection of final weld profile.
Witnessing the NDT methods and PWHT process
Witnessing the hydro test / Pneumatic test
Monitoring the heat treatment methods.
Brainstorming the welder about the techniques to improve quality.
Coordination with the client during quality Walkthrough.
Rising of NCR / CAR / TQ.
Generating quality control reports.
Inspection of welding consumable store
Material preservation
UNITED BREVERIES ENGINEERING LTD (From March 2004 to December 2006) :
A subcontractor of TECHNOPROMEXPORT for OBRA THERMAL POWER STATION (U.P Electricity Board, INDIA), 13 *100 MW boilers
Position : Welding Inspector
Roles & Responsibilities :
Inspecting the incoming materials and making reports.
Reviewing WPS /PQR / Welder Qualification records.
Inspecting Joint Configuration of Fit up prior to weld as per WPS
Maintain quality related documents such as QCP, ITP etc as required by client.
Monitor and ensure the calibration of backing oven and other measuring instruments.
Welder qualification
Reviewing QCP, ITP, Method statement & other work procedures.
Witnessing the NDT methods and PWHT process Inspection of welding consumable stores
Surveillance of welding parameters / Consumables for compliance with WPS.
Brainstorming the welder about the techniques to improve quality.
Coordination with the client during quality Walkthrough.
Rising of NCR / CAR / TQ.
Generating quality control reports
KERALA STATE ELECTRICITY BOARD :
(From May 1998 to January 2001)
Lower periyar Hydro electric power project of 3*60 M W for Kerala Government
QC Inspector (Welding)
Roles & Responsibilities :
Inspecting the materials regarding Traceability, Physical condition and
Drawing requirement.
Inspecting Joint Configuration of Fit up prior to weld as per WPS
Reviewing WPS /PQR / Welder Qualification records.
Inspecting Joint Configuration of Fit up prior to weld .
Monitoring welder performance
Witnessing the NDT methods
Visual inspection of final weld profile. Generating quality control reports.
Consumable store Inspection
Surveillance of welding parameters / Consumables for compliance with WPS.
Brainstorming the welder about the techniques to improve quality.
Coordination with the client during quality Walkthrough.
Attending RFIs and Coordinating client
Inspection and punch list preparation of test packages
Material preservation
Skills :
Material Inspection – Surveillance of welding -Visual Inspection – Quality Control Documentation Punch list preparation –Test pack preparation– Client Coordination in quality walkthrough
SOFTWARE EXPOSURE :
Operating Systems : Windows 9x/ME/2000/NT/XP
Other Software & Tools : Microsoft Office (Word, PowerPoint, FrontPage, Outlook),Code & Standards
ASME SEC IX, ASME B 31.3, ASME 31.1
Languages Known : English, Hindi, Malayalam and Tamil
PERSONAL APTITUDES :
Dynamic and self-driven with high energy levels.
Systematic.
Achievement oriented, good interpersonal skills and a team player.
Time and task oriented.
Excellent learning abilities and able to adapt quickly to new environments and new roles.
Able to work under pressure / stress.
DECLARATION :
I consider myself familiar with Mechanical Aspects. I am also confident of my ability to work in a team. I hereby declare that the information furnished above is true to the best of my knowledge and belief.
Place : DOHA
Date :