Objective :
To excel in a career where I can implement and enhance my technical skills incorporating my educational background and my current/previous job experience across functional areas of the organization and also learning various aspects of the subjects in the process.
Current Job Profile :
Working as a RNS-BSS Engineer(Project) for NE Circle Under the Contract of ZTE Telecom India Pvt. Ltd.
Present Work Role :
Commissioning of ZTE iBSC, RNC, OMCR server for both 2G and 3G on Redhat Enterprise Linux/Sun Solaris Platform and its ATP. And software upgradation of iBSC, RNC and OMCR server. Swapping of BTS Sites from Alcatel-Service area to ZTE Service Area. Loading of NODEB.
Radio parameters manipulation as per Network requirement, co-operating with the RF Engineer.
I had undergone 3 week training at ZTE IEC Bangalore in the September 2010 for commissioning of 3G RNC.
Present Resource : RNC 2nos, 2nos. iTC(Transcoder), 12nos iBSC (Intelligent BSC) , 1nos. 2G OMCR server, 1nos. 3G OMCR
Previous Job Profile In Wipro Infotech :
I had work as an O&M NSS Switch Engineer under the Contract of Wipro Infotech on Nortel GSM Switch since August 2009 to April 2010, supporting both NE-I and NE-II circle of BSNL.
Previous Job Responsibility In Wipro Infotech :
My job responsibility was 2nd Level Operation and maintenance of Nortel GSM Switch in BSNL Northeast Circle, Which includes maintenance of Nortel USP(STP), DMS 100 Switch, WNMS Proptima Server. Troubleshooting GSM Interface, Digit Analysis, Patch Updates, Routine Backup of Various Servers, NSS report analysis and giving suggestion for necessary actions to BSNL for increasing KPI. Health Checkups of MSC and rectification of Alarms.
Previous Job Profile In Ericsson India Pvt. Ltd. :
I had Work as an O&M Enginner under the Outsource of ERICSSON INDIA PVT. LTD. Since November 2007 to August 2009, supporting the north-east core nodes of Dishnet Wireless pvt. Ltd. (AIRCEL).
Previous Job Responsibility In Ericsson India Pvt. Ltd. :
My job responsibility was to carried out Operation and maintenance of NSS/BSS/Transmission. Ericsson AXE-810 base GSM Switch and its implementation and to provide technical support for BTS and Transmission to field engineers.
Technical Skills :
Tools Worked On ZTE iBSC, iTC, RNC, Nortel USP, DMS 100 Switch, AXE 810 hardware platform, Acterna protocol analyzer, X-window Client, Various Telnet IDE, Ericsson Transmission (Microwave PDH,SDH and NMS)
Work Experience :
** Creation and Monitoring of GSM Interfaces.
** GSM Circuit AT.
** B Number analysis.
** Digit Translation, Emergency call, Toll Free digit translation.
** MSRN routing.
** CALL TESTING.
** Health checks up and alarm handling for MSC.
** Routine System Backup.
** LI Client-Target Activation and CDR check.
** Hardwire troubleshooting and its replacement.
Area of Exposure :
Software & Hardware Knowledge
OS : VXWorks RTOS, AIX, SOLARIS, LINUX, Win 7, Vista, XP, 2003 server, 2000, NT 4 server, MS -DOS.
Application Soft : Network Firewall, Antivirus, VMWARE, M/S Office 2010/2007/2003,Adobe
Photoshop, PageMaker, IRSIM, Magic, CGYWIN, PSPICE, CADSTAR.
X-manager
Programming language : Intel 8085, 8086, 8251, C, Java, VB 6.
Database : MS** Access, FoxPro
Education :
** B-Tech ( Electronics and Communication ) from North Eastern Regional Institute of Science and Technology (2003-2007), Arunachal Pradesh.
** DIPLOMA (Electronics and Communication ) from CEDTI (2000-2003), Imphal, Manipur.
** 10th STD from Cambridge Hr. Sec. School (2000), Imphal, Manipur.
Project undertaken for the fulfillment of B-Tech :
Topic : Digital Chip Layout Design and Simulation
Software Used : CGYWIN (MAGIC and IRSIM).
Details : The Design includes CMOS basic gates, Logic circuits and finally full functional, ready to fabricate 8-bit ALU. Design rules are strictly followed to reduce the chip area, low power consumption. Our project objective is to enables oneself design there own prototype ICs.
Project undertaken for the fulfillment of Diploma :
Topic : Microprocessor based Heart Beat Monitor
Details : The 8085 microprocessor is to control the overall circuits. This project displays the appropriate heart beat from a consecutive couple of heart beat pulse. The raw amplified heart beat signal, when fed to oscilloscope can be use for details analysis
Training Undertaken :
** Software development using Visual Basic as Front end and MS** Access as Back end From Matrix Inc. Pvt. Limited, Panbazar, Guwahati(2005),
** Windows NT based and Linux Networking , from DOEACC CENTRE IMPHAL(2004),
** PC Maintenance and Troubleshooting from DIGITECK, Bhubaneswar, Orissa(2002).